Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081

Economical Forced Convection Oven (DKM300)

Previous 3 / 3 Next

Economical Forced Convection Oven (DKM300) DKM Series Forced Convection Oven Constant Temperature & Drying Oven Economical Forced Convection Oven (DKM300) DKM Series Forced Convection Oven Constant Temperature & Drying Oven Economical Forced Convection Oven (DKM300) DKM Series Forced Convection Oven Constant Temperature & Drying Oven Economical Forced Convection Oven (DKM300) DKM Series Forced Convection Oven Constant Temperature & Drying Oven Economical Forced Convection Oven (DKM300) DKM Series Forced Convection Oven Constant Temperature & Drying Oven Economical Forced Convection Oven (DKM300) DKM Series Forced Convection Oven Constant Temperature & Drying Oven Economical Forced Convection Oven (DKM300) DKM Series Forced Convection Oven Constant Temperature & Drying Oven


Basic fixed setting forced air convection ovens
 
Features of Economical Forced Convection Oven (DKM300)
  • Basic fixed setting forced air convection ovens
  • Forced convection, constant temperature oven with simple operation functions.
  • Fixed temperature, Quick Auto stop, Auto stop, and Auto start operating modes are possible, along with easy control capabilities
  • Settings can be made digitally using the dedicated operation menu keys or the up and down keys
  • Auto recovery after power failure, calibration offset and key-lock are possible through the auxiliary functions
     
Safety features
Self-diagnostic functions, Auto overheat prevention, Independent overheat prevention

Specifications
Item Code 212876
Model DKM300
Circulation method Forced air circulation
Operating temperature range Room temp. +10~260°C
Temp. control accuracy ±1°C (at 210°C)
Temp. distribution accuracy ±2.5¡æ£¨at 210¡æ£©
Max. temp. reaching time ~90min (at room temp. +10°C~260°C)
Interior material Stainless Steel
Exterior material Cold rolled steel plate with melamine resin baking finish
Heat insulating material Glass wool
Heater SUS pipe heater
Heater 0.8kW
Fan type / Motor Scirocco fan / Condenser type motor 10W
Cable port 30 mm l.D.×1 pc. (right side)
Exhaust port 30 mm l.D.×2 pcs.(the top)
Temp. controller PlD control by microprocessor
Temp. setting method Operation menu key and digital setting by UP/DOWN key
Temp display method Measurement temp. : Digital display by green LED¡¡Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. (with time wait function)
Operation functions Fixed temperature operation, Quick Auto-stop, Auto start, Auto stop
Additional functions Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control SSR control
Sensor K-thermocouple
Safety device Self diagnostic functions (Sensor trouble detection, Memory error, Measured temperature lower limit error, Measured temperature error), Auto overheat prevention, Independent overheat prevention.
Shelf plate with standard load 15kg/pc.
Shelf support step number 6 steps
Shelf support pitch 30mm
Shelf plate Stainless steel
Shelf plate 2 pcs.
Shelf support 4 pcs.
Internal dimensions£¨W×D×H mm£© 300×300×300mm
Internal capacity 27L
External dimensions£¨W×D×H mm£© 410×451×670mm
Power Source AC220V 4A
Single phase
Weight 35kg

Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.
 
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version