Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081

Forced Convection Oven (DKN602)

Previous 4 / 6 Next

Forced Convection Oven (DKN602) DKN Series Forced Convection Oven Constant Temperature & Drying Oven Forced Convection Oven (DKN602) DKN Series Forced Convection Oven Constant Temperature & Drying Oven Forced Convection Oven (DKN602) DKN Series Forced Convection Oven Constant Temperature & Drying Oven Forced Convection Oven (DKN602) DKN Series Forced Convection Oven Constant Temperature & Drying Oven Forced Convection Oven (DKN602) DKN Series Forced Convection Oven Constant Temperature & Drying Oven Forced Convection Oven (DKN602) DKN Series Forced Convection Oven Constant Temperature & Drying Oven


Standard ''Best Seller'' ovens - Fully programmable
 
Features of Forced Convection Oven (DKN602)
  • Standard forced air convection ovens
  • Standard forced air convection ovens are programmable and come with extended functions and safety features.
  • Best seller based on excellent performance & affordability
  • Superior temperature accuracy
  • DKN302/402/602/612 come with observation windows
  • Programmable PID controller for easy program settings 30-step, 3-pattern program controller with repeat functions
  • Fixed setting, programmed, Quick Auto stop, Auto stop, and Auto start operating modes with easy control capabilities
  • Increased safety and Self-diagnostic function
  • Over-heating prevention and calibration off-set are possible with auxiliary functions
  • Easy to use and maintain
  • Built in exhaust ports
     
Safety features
Self diagnosis functions (Temperature sensor abnormal, Heater disconnection, SSR-short) Automatic overheating prevention, Electric leakage breaker with over current protection, Key lock function

<table border=''1'' cellpadding=''5'' cellspacing=''0'' style=''width:900px;''>
Item Code 212872
Model DKN602
Circulation method Forced air circulation
Operating temp. range Room temp. +10°C to 260°C
Temp. adjustment accuracy ±1¡æ£¨at 210¡æ£©
Temp. distribution accuracy ±2.5¡æ£¨at 210¡æ£©
Max. temp. reaching time Approx. 90 min.
Interior/Exterior material Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material Glass wool
Heater Stainless pipe heater
Heater 1.5kW
Fan Type / Fan Motor Scirocco fan, Condenser type motor 10W
Cable hole 30mm I.D. (on the right side) 1pc.
Exhaust port 30mm I.D. x 2 (on top)
Observation window 250×280mm Chemical strengthening glass x 3
Temp. controller 3 patterns program controller, PID control by microprocessor
Temp. setting method Digital setting by UP/DOWN key
Temp. display Measurement temp. : Digital display by green LED Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function Fixed temperature operation, Program operation, Auto start, Quick Auto-stop
Program mode Program operation : 3 patterns, 30 steps(30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control SSR control
Sensor K-thermocouple
Safety device Self diagnosis functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Shelf plate with standard load ~15kg/piece
Shelf support step number/pitch 13 steps / 30mm
Shelf plate Stainless steel, 1pc on the bottom screwed (DKN912C, 2 pcs)
Shelf plate / support 2 pcs. / 4 pcs.
Internal dimensions£¨W×D×H mm£© 600×500×500mm
External dimensions£¨W×D×H mm£© 710×651×870mm
Remarks(dimensions) 150L
Power Source AC115V 12.5A
Single-phase
Weight 65kg

Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version