28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Forced Convection Oven (High Temp.) (DN611H)
| Previous | 1 / 2 | Next |
Industrial & Laboratory Forced Convection
Features of Forced Convection Oven (High Temp.) (DN611H)
- High precision constant oven
- Due to high precision control system, high performance temperature control is realized, and the CO2 discharge, power discharge can be also displayed at the monitor.
- Suitable for Heat Insulation Test and Curing Process up to 360deg.C.
- Simple Operation by Interactive Key Input.
- Calibration offset function, power failure recovery mode , the user configuration information and various function are standard added.
- Incorporates with maximum 99 steps, 99 patterns program controller with repeat function.
- Loaded with Total Operation Hours Timer.
- Data acquisition from internal test device is easy because of cable holes.
Specifications
| Item Code | 212902 |
|---|---|
| Model | DN611H |
| Convection Type | Forced Convection |
| Operating Temp. Range | Room Temp.£«15¡«360¡æ |
| Temp. Adjustment Accuracy | ±0.2¡æ£¨at 360¡æ£© |
| Temp. fluctuation | ±0.6¡æ£¨at 360¡æ£© |
| Temp. Distribution Accuracy | ±3¡æ£¨at 360¡æ£© |
| Temp. Gradient | 20¡æ£¨at 360¡æ£© |
| Time to Reach to Max. Temp. | Approx. 60min. |
| Interior / Heat Insulation Material | Stainless Steel / Glass Wool + Ceramic Fiber |
| Fan | Sirocco Fan, Condenser Type Motor 30W |
| Cable holes | 33mm diameter (right side) |
| Temp. Control Type | PID Control by Micro Computer |
| Temp. Setting Type | Digital Setting by UP/DOWN Key |
| Temp. Display | Digital Indication by Green LED |
| Other Display | Temp. Pattern Display for Operating Display by LED |
| Timer / Timer Resolution | 1min. to 99hrs. 59min. or 100hrs. to 999hrs. / 1min. or 1hrs. |
| Operating Function | Fixed Temp. Operation, Automatic Start, Automatic Stop, Quick automatic stop, Program Operation |
| Additional Function | Calendar time(24 hours), Calibration Off Set Function, electricity consumption, CO2 discharge, Heater output operation display monitor, power failure return mode, user configuration information saving/summoning. |
| Heater Circuit Control / Sensor | Triac Zero-cross Type / K-Thermocouple( for temp. adjustment, individual overheating prevention) |
| Safety Countermeasure | Self Diagnosis Function (Sensor, Heater, Fan, Triac, Main Relay, Automatic Overheat Prevention), Key Lock Function, Independent Overheating Prevention, Door Switch, Electric Leakage Breaker |
| Shelf Max. Load | Approx. 30kg / shelf |
| Shelf support step number / Pitch | 17pcs. / 30mm |
| Shelf material | Stainless wire |
| Accessories¡¡Shelf / Shelf support | 2pcs/ 4pcs |
| Heater | SUS Pipe Heater 4.0kW |
| Exhaust port | 33mm diameter x 2 ( back side) |
| Internal dimensions£¨W×D×H mm£© | 620×600×600mm |
| External dimensions£¨W×D×H mm£© | 790×845×1065mm |
| Remarks(dimensions) | 223L |
| Power Source |
AC220V 20A Single-phase |
| Weight | 130kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.