Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4, Pusat Perniagaan Suria Puchong, 47110 Puchong, Selangor, Malaysia.
+6012-234 0081

Inert Oven (DN611I )

Previous 1 / 2 Next

Inert Oven (DN611I ) DN-I Series Inert Oven Constant Temperature & Drying Oven

Suitable for Curing Process in No Oxidation Environment
Features of Inert Oven (DN611I )
  • Suitable for curing process in no oxidation environment.
  • Suitable for heat insulation test and curing process up to 360°C.
  • Simple operation by interactive key input
  • Operation monitor visualizes controller status, temp and temp. changing.
  • Incorporates with maximum 99 steps, 99 patterns program controller with repeat function.
  • Loaded with total operation hours timer
  • N2 gas flow amount controllable.
Item Code 212904
Model DN611I
Method Forced Convection
Operating temp. range Room Temp. +15 to 360°C
Temp. adjustment accuracy ±0.2°ś£®at 360°ś£©
Temp. fluctuation ±0.6°ś£®at 360°ś£©
Temp. uniformity ±3°ś£®at 360°ś£©
Temp. gradient 20°ś£®at 360°ś£©
Max. temp. reaching time Approx. 60 min.
Nitrogen substitution time required Approx. 70 min. (Ordinary temp with nitrogen concentration of 2%)
Interior Stainless steel plate
Exterior Cold rolled steel plate with baked melamine resin coating
Heat insulator Glass wool + Ceramic fiber
Heater Stainless pipe heater 4.0kW
Sensor K thermocouple for temperature control and independent overload prevention device
Fan type / Motor Sirocco Fan / Condenser type
Flow meter, Gas carrier Max. flow 30L/min, O.D. 9mm hose nipple
Temp. controller PID control by microcomputer
Temp. display type Temp. display: Digital display by 4 digit green LED (resolution:1oC) Setting temp. display: Digital display by 5 digit orange LED (resolution:1oC)
Timer / Timer resolution 1min. to 99hrs. 59mins. or 100hrs. to 999hrs. / 1min. or 1hr.59∑÷
Operation function Fixed temp. operation, Auto-start, Auto-stop, Quick autostop, Program operation
Program mode Repeatable operation function up to max 99 steps or 99 patterns.
Additional functions Power on and operation time integrating function (up to 65535 hours), Calendar time (24 hours), Calibration offset, Monitor display of integrated power consumption
Additional functions Total CO2 emissions and heater operating output, Power failure recovery mode, Save and read out of user settings
Heater circuit control Heater circuit control
Safety device Self diagnostic functions (Sensor failure, SSR short circuit, Heater line disconnection, Main relay contact damaged, Automatic overheat prevention),
Safety device Key lock function, Independent overheating prevention, Electric leakage breaker, Door switch
Shelf max. load Approx. 30kg / shelf
Shelf support step number/pitch 17pcs. / 30mm
Shelf plate / support Stainless wire, 2 pcs. / 4 pcs
Internal dimensions£®W×D×H mm£© 620×600×600mm
External dimensions£®W×D×H mm£© 790×845×1065mm
Remarks(dimensions) 223L
Power Source AC220V 20A
Weight 130kg
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version