28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Fine Oven (Large Capacity) (DF1032)
| Previous | 2 / 2 | Next |
Large fine oven designed to support high throughput.
Features of Fine Oven (Large Capacity) (DF1032)
- Allows precision maintenance of large parts at a constant temperature
- Quick exhaust and cooling in the unit with the exhaust damper
- Interactive key entry on the control panel with a green LED digital display for easy settings
- Features power consumption/ CO2 emissions monitoring
- Increased safety and self-diagnostic functions
Specifications
| Item Code | 211761 |
|---|---|
| Model | DF1032 |
| Internal dimensions£¨W×D×H mm£© | 1000×1000×1000mm |
| External dimensions£¨W×D×H mm£© | 1700×1215×1530mm |
| Remarks(dimensions) | 1000L |
| Power Source |
AC220V 19A Three-phase |
| Weight | 450kg |
| Fan motor | Stainless steel axial flow fan (capacitor motor: 20W), Two motors used for Model 1032 |
| Cable port | I.D. ø30mm (rear) |
| Heat insulator | Glass wool |
| Other additional structure | Exhaust damper (manual operation) |
| Safety device | Self-diagnostic functions (temp. sensor error, heater disconnection, SSR short-circuit, automatic overheat prevention), Door switch, Fan Failure Detection, key lock, independent overheat protection, electric leakage breaker with over current protection |
| Shelf / support | 3 pcs. / 6 pcs. |
| System | Forced air circulation and ventilation |
| Operating temp. range | Room temp. +15°C~200°C |
| Temperature fluctuation | ±1.5°C (at 200°C) |
| Temperature slope | 12°C (at 200°C) |
| Temperature controller | PID Z control |
| PID Z control Temp setting method | Digital setting with ¡ø/¨‹ keys |
| Timer | 1 min~99 hrs 59 min (Resolution: 1 minute or 1 hour) |
| Operation function | Fixed temperature operation, Program operation (Maximum 99 steps, up to 99 patterns, repeat operation function) Duration/time select timer operation function (Fixed temperature operation, auto start/auto stop/quick auto stop, program operation auto start) |
| Additional functions | Accumulated Power on and Operation Time (up to 65,535 hours); Calendar Time (24 hours); Calibration Offset; Monitor Display of Accumulated Power Consumption, Total CO2 Emission, and Heater operating Output; Power Recovery Mode; User Settings Save and Restore Function; Fan Speed Setting Function |
| Sensor | K-thermocouple (double sensor) |
| Heater | Stainless steel pipe heater with a fan |
Maintenance and warranty
- Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
- External dimensions do not include protrusions.