28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Low Temperature Incubator (Programmable) (IN604)
| Previous | 3 / 3 | Next |
Best selling incubator for low temperature tests and environmental tests
Features of Low Temperature Incubator (Programmable) (IN604)
- Standard low temperature incubator
- Available for wide variety of applications from various constant temperature tests to environmental tests
- Forced circulation with a fan enables high accuracy temperature control and even temperature distribution
- Employment of a large dual-glass door which, with the inner door, forms a triplex glass to improve temperature heat retention(IN604W)
- A convenient slide shaker table (optional) is available to make taking out/putting in samples easier (IN604W)
- Room light to make inside the unit easily visible as standard(10W fluorescent lamp, IN604W)
- The glass inner door keeps temperature changes during observation samples minimum
- Employs coolant R404A that complies with Freon regulations
Specifications
| Item Code | 211289 |
|---|---|
| Model | IN604 |
| System | Forced air convection |
| Operating Temperature Range | -10¡«50¡æ |
| Temperature Adjustment Accuracy | ±0.3¡æ£¨when refrigerator in continuous operation), ±1.0¡æ£¨when refrigerator cycle operation£© |
| Temperature Distribution Accuracy | ±1.0¡æ£¨at 37¡æ£© |
| Max. Temperature Reaching Time | 20¡«50¡æ¡¡approx. 30min. |
| Lowest Temperature Reaching Time | 20¡«-10¡æ¡¡approx. 65min. |
| Interior | Stainless Steel |
| Exterior | Chrome-free electronic galvanized plated steel plate chemical-proof baking finish |
| Heat Insulation Material | Stylene foam (non-freon) |
| Refrigerator | Air-cooled fully closed compressor 300W |
| Refrigerator Medium | R404a |
| Defrosting Mechanism | Manual ON / Auto OFF, Timer operation, Cycle operation |
| Blower | Axial fan |
| Heater | Iron-chrome wire heater 750W |
| Sensor | Double sensor:Pt. resistance temperature detector, Pt100Ω(Temperature controller), K-thermocouple(Overheat prevention device) |
| Cable Port | 32mm ID £¨Right side from the front) |
| Temperature Control | PID |
| Temperature Setting | Digital setting with¡ø¨‹ key |
| Temperature Display | Measured temperature: 4-digit orange LED digital display+ VFD fluorescent display |
| Timer/Timer Resolution | 0¡«999 hrs. 59min. / 1min. |
| Operation Function | Fixed operation, Program operation, Auto stop, Auto start |
| Additional Function | Timer function£¨accumulated time to 49,999 hrs.£©, Calibration off-set function, Clock display |
| Safety Device | Self-diagnostic functions(Temperature sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat prevention), Key-lock, Over current ELB, Overheat preventive device |
| Shelf Loading Capacity | 15kg/shelf |
| Shelf support step number | 13 steps |
| Shelf support pitch | 30mm |
| Shelf / Support | Stainless punching metal 3 shelves / 6 supports |
| Room Light / Service Outlet | - |
| Program Mode | Up to 32 steps, Repeat, Gradient operation |
| Door Key | - |
| Internal dimensions£¨W×D×H mm£© | 600×477×500mm |
| External dimensions£¨W×D×H mm£© | 710×645×913mm |
| Remarks(dimensions) | 143L |
| Power Source | AC220V 5A |
| Weight | 89kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.