28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Low Temperature Incubator (Energy Saving & Programmable) (INE800)
Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration
Features of Low Temperature Incubator (Energy Saving & Programmable) (INE800)
- Inverter control incubator
- 44% power savings compared to conventional models
- Controller upgraded for easier viewing and operability
- Temperature distribution accuracy improved for better incubation
- Standard equipped with program operation, auto-stop, auto-start, self-diagnostic, timer, calibration off-set, memory and electricity & O2 emmission monitor
- Designed with Analog output(4-20mA) and External communication port(RS485)
Specifications
| Item Code | 00 |
|---|---|
| Model | INE800 |
| Safety Device | Self-diagnostic functions(Temp. sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat prevention), Key-lock, Over current ELB, Overheat preventive device |
| Shelf Loading Capacity | 15kg/shelf |
| Shelf Support Number | 23 steps |
| Shelf Support Pitch | 30mm |
| Shelf / Support | Stainless punching metal 5 shelves / 10 supports |
| Door Key | 2 pcs. |
| Silicon Stopper for Cable Hole | 1 pc. |
| System | Forced air convection |
| Operating Temperature Range | 0¡«60¡æ |
| SettingTemperature Range | -5¡«65¡æ |
| Temperature Adjustment Accuracy | ±0.2¡æ£¨at 37¡æ during continuous operation), ±0.5¡æ£¨at 37¡æ cycle operation£© |
| Temperature Fluctuation | ±0.3¡æ£¨at 37¡æ during continuous operation), ±1.0¡æ£¨at 37¡æ cycle operation£© |
| Temperature Distribution Accuracy | ±0.5¡æ£¨at 37¡æ during continuous operation£© |
| Temperature Gradient | ±2.0¡æ£¨at 37¡æ during continuous operation£© |
| Max. Temperature Reaching Time | 20¡«60¡æ¡¡approx. 35min. |
| Lowest Temperature Reaching Time | 20¡«0¡æ¡¡approx. 50min. |
| Cooling Mechanism | Continuous operation, Cycle operation, Cooling-stop operation |
| Interior | Stainless Steel |
| Exterior | Chrome-free electronic galvanized plated steel plate chemical-proof baking finish |
| Heat Insulation Material | Stylene foam (non-freon) |
| Refrigerator | 200W Rotary Unit |
| Refrigerator Medium | R134a, 350g |
| Operation Range of Freezer | Below 40¡æ |
| Defrosting Mechanism | Hot gas bypass method, Manual(random) defrost / Auto (time) defrost |
| Blower | DC Axial fan 4-step, equipped with error signal when stopped |
| Heater | Iron-chrome wire heater 750W |
| Sensor | Double sensor:Pt. resistance temperature detector, Pt100Ω(Temperature controller), K-thermocouple(Overheat prevention device) |
| Cable Port | 50mm ID £¨Right side from the front) |
| Temperature Control | PID |
| Temperature Display | Setting temperature: 5-digit orange LED digital display, Actual temperature: 4-digit green LED digital display |
| Temperature Display | Measured temperature: 4-digit orange LED digital display+ VFD fluorescent display |
| Timer/Timer Resolution | 0¡«99 hrs. 59min. / 1min. |
| Operation Function | Fixed operation, Auto stop, Auto start, Quick auto stop, Program (99 steps, 99 patterns) |
| Additional Function | Timer, Calibration off-set function, Electricity & CO2 emmission monitor, Blackout recovery option, Saving and Readout function for user setting, Clock display (24hrs) |
| Internal dimensions£¨W×D×H mm£© | 600×477×1000mm |
| External dimensions£¨W×D×H mm£© | 710×645×1730mm |
| Remarks(dimensions) | 286L |
| Power Source |
AC115V /AC220V |
| Weight | 135kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.