28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Benchtop Steam Sterilizer (Laboratory Use) (SK111C)
| Previous | 1 / 2 | Next |
Space-saving, low cost benchtop sterilizer, ideal for research facilities
Features of Benchtop Steam Sterilizer (Laboratory Use) (SK111C)
- Sterilizer with an 18 liter chamber for research processes and areas that are
- limited in space. High pressure steam is the most widely used method for
- sterilization due to its speed, reliability, and effectiveness. Newly designed
- small capacity sterilizers provide a safe, reliable high pressure steam sterilizing
- environment within a self-contained unit that is particularly easy to use.
- This sterilizer is ideal for a wide range of applications.
- Benchtop size - 18 Liter
- Powerful 1500W pipe heater
- Easy to read 4 digit LED display
- Built in Drain Valve for easy cleaning
- Programmable sterilizing and temperature functions
- Timer Setting Range 0 to 999 min.
- Space-saving
- Standard equipped with calibration offset,lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO2 emission, and heat output, save and access operator setting information
- Water level detection sensor with alarm
- Overheat Protection Sensor
- Lid closure sensor (Inter lock)
- Pressure Lamp Indicator
- Increased chamber wall thickness (2mm)
- New improved silicon lid gasket and easy to replace
Specifications
| Model | SK111C |
|---|---|
| Temp. setting range | 50 to 126°C |
| Heater | 1500W stainless steel heating pipe |
| Timer | 0 min. to 999 min. |
| Safety device | Pressure safety valve, Low water sensor, Dual exterior walls, |
| System | Automatic high pressure steam sterilizer |
| Max. operational pressure | 0.2 MPa (at 126oC) |
| Interior Material | Stainless steel SUS 304 |
| Temp. controller | PlD control by microprocessor |
| Temp. setting method | Digital setting by ¡ø/¨‹ keys |
| Temp display method | Digital display by green LED |
| Accessories | 1 stainless steel mesh basket (254mm×240mm) and stainless steel bottom |
| Internal dimensions£¨W×D mm£© | 343×550mm |
| External dimensions£¨W×D mm£© | 280×275mm |
| Remarks(dimensions) | Internal capacity¡¡18L |
| Power Source | AC220V 9A |
| Weight | 17.5kg |
Maintenance and warranty
- Yamato autoclaves are for laboratory use only. They cannot be operated for medical use.
- The pressure vessel conforms to the safety standards in Japan. Any clarification or modification works to meet the local safety standards in each country shall be out of the manufacturer’s scope.
- Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
- External dimensions do not include protrusions.