Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081

Steam Sterilizer (Laboratory Use, with Drying Process) (SM830)

Previous 1 / 10 Next

Steam Sterilizer (Laboratory Use, with Drying Process) (SM830) SM Series Steam Sterilizer Sterilizer Steam Sterilizer (Laboratory Use, with Drying Process) (SM830) SM Series Steam Sterilizer Sterilizer Steam Sterilizer (Laboratory Use, with Drying Process) (SM830) SM Series Steam Sterilizer Sterilizer Steam Sterilizer (Laboratory Use, with Drying Process) (SM830) SM Series Steam Sterilizer Sterilizer Steam Sterilizer (Laboratory Use, with Drying Process) (SM830) SM Series Steam Sterilizer Sterilizer


Fully automatic, Easy setting by interactive touch panel, Drying function
 
Features of Steam Sterilizer (Laboratory Use, with Drying Process) (SM830)
  • Variety of safety functions
  • Fully automatic operation from steam sterilization to drying process
Specifications
Item Code 00
Model SM830
System Automatic high-pressure steam sterilization
Operating temp. range (Sterilization) 105¡«135¡æ
Operating temp. range (Drying) 135¡«150¡æ
Max. pressure capacity 0.255MPa
Operable ambient temp. 5¡«35¡æ
Lid Manual upward opening with an interlock for safety
Temp. controller PID control by microprocessor
Temp. display / setting Touch panel type
Timer / Timer resolution 0 or 1 min. to 99 hrs 59 min. / 1 minute
Safety device Sensor error, SSR short circuit, Heater disconnection, Water level, Overheat, Lid unlock, Over-pressure, Setting, Memory, Safety valve
Accessories 3 pcs. stainless steel mesh basket (332dia. x 195.5D), Drain board, Drain bottle, Chemical indicator, Filter, Drain tray, each 1 pc.)
Internal dimensions£¨φ×H mm£© φ370×750mm
External dimensions£¨W×D×H mm£© 520×660×1161mm
Remarks(dimensions) 80L
Power Source AC200¡«240V
9A ¡«12.5A
Weight 137kg
 
Maintenance and warranty
  1. Yamato autoclaves are for laboratory use only. They cannot be operated for medical use.
  2. The pressure vessel conforms to the safety standards in Japan. Any clarification or modification works to meet the local safety standards in each country shall be out of the manufacturer’s scope.
  3. Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
  4. External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version