Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081

Steam Sterilizer (Laboratory Use) (ST201)

Previous 4 / 4 Next

Steam Sterilizer (Laboratory Use) (ST201) ST Series Steam Sterilizer Sterilizer Steam Sterilizer (Laboratory Use) (ST201) ST Series Steam Sterilizer Sterilizer Steam Sterilizer (Laboratory Use) (ST201) ST Series Steam Sterilizer Sterilizer Steam Sterilizer (Laboratory Use) (ST201) ST Series Steam Sterilizer Sterilizer


Automatic operations carried out with an interactive key input system.
 
Features of Steam Sterilizer (Laboratory Use) (ST201)
  • With an interactive key input system, the conditions are memorized.
  • With a single key press, everything is done automatically from air exhausting to sterilization and dry.
  • Setting for hours and continuous operation are available.
  • Possible to sterilize media also.
  • Safety measures are enriched, including self-diagnosis function.
Specifications
Item Code 241105
Model ST201
System Automatic high pressure steam sterilizer
Temp. setting range: Sterilization 105 to 123deg.C
Maximum operational pressure 0.18MPa
Interior Material Stainless steel
Heater 1.3kW
Temp. controller PlD control by micro processor
Temp. setting method Digital setting by UP/DOWN key
Temp display method Digital display by green LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs.
Min. division 1 min. or 1 Hrs.
Safety countermeasures Self diagnosis functions (Sensor, Heater, SSR, Main relay, Low water), Over pressure safety valve, Electric leakage breaker
Internal dimensions£¨φ×H mm£© φ240×445mm
External dimensions£¨W×D×H mm£© 410×470×957mm
Remarks(dimensions) 20 (22) liters
Power Source AC220V 6.2A
Single phase
Weight 60kg
Accessories 2 Racks (mesh pitch 8.5 mm), 1 Bottom plate, 1 Steam saucer and 1 Drain bottle.
 
Maintenance and warranty
  1. Yamato autoclaves are for laboratory use only. They cannot be operated for medical use.
  2. The pressure vessel conforms to the safety standards in Japan. Any clarification or modification works to meet the local safety standards in each country shall be out of the manufacturer’s scope.
  3. Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
  4. External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version