Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4, Pusat Perniagaan Suria Puchong, 47110 Puchong, Selangor, Malaysia.
+6012-234 0081

Economical Water Bath (Constant Temp.) (BM500)

Previous 3 / 12 Next

Economical Water Bath (Constant Temp.) (BM500) BM Series Water Bath Constant temperature bath

Stand, clamp and lid are standard equipment, round · Erlenmeyer flask are usable as well.
Features of Economical Water Bath (Constant Temp.) (BM500)
BM100/110/200/210 : Analog set up system, Thermometer is included to verify actual temperature, Protected water tank prevents burns caused by contact, Equipped with a drain (BM200/210).
BM401/410 : Digital temperature setting by ¡ø/¨‹ keys, Protected water tank prevents burns caused by contact, Equipped with a drain.
BM500/510 : Digital temperature setting by ¡ø/¨‹ keys, Removable water tank for convenient cleaning and changing of water, Heater situated outside the water tank, Exclusive connection for bath operational setting function with RE601/801 rotary evaporator.

Item Code 222120
Model BM500
Operating temp. range Room temp. +5~90°C
Temp. adjustment accuracy ±1.5°C (at agitation)
Temp. control system PlD control by microprocessor
Temp. setting / display method Digital 7 segment LED, Digital setting by ¡ø/¨‹ keys
Additional function Keypad lock, maintenance function (RE signal transmission and reception), calibration off-set, power failure recovery
Heater 1kW (100V)¡¡1.44kW (120V)
Sensor K thermocouple
Safety device Self-diagnostic functions (automatic overheat prevention, sensor trouble, triac short circuit,heater disconnecton, main relayfailure), circuit protector, thermalfuse, micro switch to detectheating without water
Interlock control function Automatic control by signal reception from RE 600/800 controller (operation continuation, heat retention operation, stop), error declaration to RE 600/800
External dimensions£¨W×D×H mm£© 340×349×231mm
Remarks(dimensions) Max. I.D.240×bottom, Dia165×D122mm, Approx. 4L
Power Source AC100 to 120V
Weight 5.5kg
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version