Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4, Pusat Perniagaan Suria Puchong, 47110 Puchong, Selangor, Malaysia.
+6012-234 0081

Low Temperature Baths (BLG200)

Previous 1 / 2 Next

Low Temperature Baths (BLG200) BLG Series Water Bath (Low constant temp.) Constant temperature bath Low Temperature Baths (BLG200) BLG Series Water Bath (Low constant temp.) Constant temperature bath Low Temperature Baths (BLG200) BLG Series Water Bath (Low constant temp.) Constant temperature bath Low Temperature Baths (BLG200) BLG Series Water Bath (Low constant temp.) Constant temperature bath


An all-in-one liquid cooling bath with stirrer that eliminates constant monitoring and replenishment of dry ice and liquid nitrogen.
 
Features of Low Temperature Baths (BLG200)
 
Features
Lowest temp. reach time is approximately one hour after commencing operation (or within 30 minutes in a no-load state).
 
Features
Powerful neodymium magnet is used, which enables simultaneous stirring of multiple reactors.
 
Features
Equipped with ON-timer function (which facilitates preparation for the next day’s experiments).
 
Features
Temp. of 80°ś below zero (BLG100) is optimum for small-scale experiments (up to 100 ml).
 
Features
The type for 40°ś below zero (BLG200) is optimum for raw material synthesizing scale (up to 400 ml). Aluminum beads are used in the bath.

Specifications
Item Code 221705
Model BLG200
System Stirring cooler 80W, with helium refrigerant (not Freon)
Temp. control range -40°C to 0°C (at ambient temp. of 23°C ± 5°C)
Temp. control accuracy ±0.3°C (the cooling bath temp. in the stable state)
Temp. fluctuation ±0.3°ś
Lowest temp. reaching time Approx. 60min (20°C → -40°C)
Bath capacity Aluminum made/ approx. 1000ml
Temperature control PID control + Inverter control
Temperature display and setting Digital
Maximum applicable container size 500 mL three-neck flask
Stirring function Neodymium magnet type. 100 – 1200 rpm, with the rotation speed displayed digitally
Timer ON timer only (maximum 99 hours 50 minutes)
Accessories Adiabatic cover, Stainless steel support×2 pieces, Operation manual, Warranty card
External dimensions£®W×D×H mm£© 210×425×295mm
Remarks(dimensions) Aluminum made/ approx. 1000ml
Power Source AC115V / 220VV
Single phase with step-down transformer
Weight 15kg
 
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version