28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Laboratory Flask Mixer (LM100)
| Previous | 2 / 2 | Next |
LM Series compact design flask mixer features integrated drive and stirring seal allowing direct installation of flask and stirring in a vacuum and sealed state. No time-consuming shaft alignment required. Its strong stirring power is perfect for samples of high volume and high viscosity.
Features of Laboratory Flask Mixer (LM100)
- LM100/110 is designed with manual type rotation speed while LM200/210 is equipped with digital indicator.
- Capable of vacuuming up to 399.9Pa without impairing rotation efficiency
- Directly attachable to a three-neck flask 24/40, 29/42 optional
- Maintenance free and superior DC brushless motor
- Belt drive transmission minimizes noise and vibration
- Variety of stirring shafts and blades available to handle small to large volume samples
- Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon® rubber seal available as option
- At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option
- Equipped with 24/40 rotary joint, 29/42 optional
- Capable of AC100-240 by changing power cord
Specifications
| Item Code | 231527 |
|---|---|
| Model | LM100 |
| Operating temp. range | 5¡æ¡«35¡æ |
| Operating speed range *1 | 50¡«1000rpm * 1 |
| Max. torque | range 0.1N・£í |
| Max. ultimate vacuum | 399.9Pa below |
| Exterior | PBT /ADC12 (Surface treatment: Baking finish) |
| Motor | DC brushless motor 30W |
| Power switch | Speed control dial with switch (Stepless adjustment) |
| Rotation speed indication | None |
| Operation indicator lamp | LED (Green) |
| Adaptable flask size | 50~5000ml |
| Joint size | TS24/40 |
| Chuck | ø8mm (ø7.9~7.95) |
| Sealing material | PTFE (rotary joint) / FKM (oil seal,o ring) |
| Safety device | Overload protection function*2, Coupling cover (Hair entanglement prevention structure), Slow start function |
| Included accessories | Hexagon socket head cap screw & wrench, AC adapter, 3m power cord, Coupling cover, Handle (arbor), Fask clip |
| Operational accessories*3 | Stirring shaft (PTFE, Stainless steel, Glass), Propellers (Different types and sizes), Stand |
| External dimensions£¨W×D×H mm£© | 59×108×222mm |
| Power Source | AC100/120V |
| Weight | 0.7kg |
Remarks(specifications)
1 Max. revolutions differ depending on the combination of oil seal + stirring shaft 50~1000rpm: FKM oil seal + PTFE stirring shaft / PTFE oil seal + glass or SUS stirring shaft : 50~300rpm: FKM oil seal + glass or SUS stirring shaft / PTFE oil seal + PTFE
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.