28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Spray Dryer (ADL311S-A)
| Previous | 1 / 2 | Next |
Easily micronize liquid samples with a spray dryer
Features of Spray Dryer (ADL311S-A)
- ADL311SA: For aqueous soluble samples (When organic solvent is used, a GAS410 organic solvent recovery unit is required.)
- Easy setup, easy
- Suitable for heat sensitive samples. High heat is not directly applied to dry, fine powder
- Obtain contaminant free fine powder which is not oxidized and contains minimal moisture
- Direct drying of solution or solution liquid into fine powder. No pre- or post processes such as filtration, separation, or pulverization required
- Safe and explosion free working is guaranteed in combination with GAS410 due to oxygen & pressure control
- Organic solvents are recovered in a closed loop to protect the environment to enable minimized pollution
- Easy operation with one-touch detachable mechanism for drying chamber and cyclone
- An arm jack is equipped as standard for easy installation and removal of glassware attachments
- A service outlet (max.2A) and a sample stand are equipped as standard for connecting a magnetic mixer for stirring suspended liquid samples
- Unique peristaltic pump, nozzle cooling mechanism, pulse jet mechanism and a nozzle knocker for stable spray drying
- ADL311SA is highly mobile on wheels, or usable with shorter height as a bench top unit by removing the movable caster operation
Specifications
| Item Code | 212738 |
|---|---|
| Model | ADL311S-A |
| Temp. adjusting unit setting range | 40 to 220°C (inlet temperature), 0 to 98°C (Outlet temperature) |
| Temperature adjusting accuracy | Inlet temperature±1°C |
| Drying air amount adjusting range | 0 to 0.7m3/min |
| Spray air pressure adjusting range | 0 to 0.3MPa |
| Liquid sending pump flow rate range | 0 to 26 mL/min |
| Spray air line washing function | Spraying at the nozzle tip, Manual pulse jet system |
| External output | Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA) |
| Temperature adjusting device | PID digital temperature adjusting device |
| Touch panel | Blower, Heater, Liquid sending pump, Pulse jet switch, error display |
| Control select switch | Inlet temperature, Outlet temperature control switch(Outlet temperature control is conditional) |
| Temperature sensor | K-thermocouple |
| Heater | 2.0kW (at200V) to 2.88kW (at240V) |
| Liquid sending | Fixed amount peristaltic pump |
| Spraying air pump | For water soluble samples air compressor is used (sold separately). For organic solvent samples the integrated compressor in GAS410 is used (No separate air compressor required). |
| Service outlet | For stirrer: AC100V, MAX. 2A |
| Suction blower | Bypass blower |
| Filter | Suction filter, Exhaust filter |
| Recovery of solvent | Solvent recovery unit GAS410 (Sold separately) is used |
| Spray nozzle cooling mechanism | Connector: nipple×2, O.D.: ø10.5mm |
| Spray air connection diameter | Nipple diameter: ø7mm |
| Spray air pressure | Bourdon tube: 0.3 MPa |
| Exhaust connecting diameter | ø50mm |
| Safety function | Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error |
| External dimensions（W×D×H mm） | 580×420×1125mm |
| Power Source |
AC200-AC240V 16-18A Single phase |
| Weight | 80kg |
| Accessories | Silicon tubes (with a stopper)×3, Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, ''Tetron'' braided tube hose 5m (with two hose bands) |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.