28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Spray Dryer Pulvis Mini Spray (GB210-A)
| Previous | 2 / 2 | Next |
Capable of drying ultra small samples as low as 0.5g of solid content.Can spray dry into fine powder 1μm in size when optional mini cyclone is used.
Features of Spray Dryer Pulvis Mini Spray (GB210-A)
- Compact spray dryer that can produce powder easily on a laboratory scale. It is capable of variety of applications from preliminary experiments in a pilot plant to drying work in general laboratories.
- Samples unstable at high temperatures can be reliably processed into fine powder. The heat is applied instantly and indirectly to the powder itself
- Prepared fine powder will not be oxidized, contains minimal moisture and is contaminant-free
- Direct drying from solution/suspension liquid to fine powder with a reduced risk of contamination. No pre or post processes such as filtration, separation, or pulverization are required
- Processing of samples containing organic solvents is made possible by connecting the Solvent Recovery Unit GAS410
- This unit can also be used as a fluid bed drying granulator by installing a separate mini bed attachment GF200 instead of GF300 spray drying attachment
- An automatic lift is equipped as standard to enable easy installation or removal of glass drying chamber attachment
- A service outlet (max. 2A) and a sample stand are equipped as standard for connecting a magnetic mixer for stirring suspended liquid sample
- Stable spray drying using a unique peristaltic pump, nozzle cooling mechanism, pulse jet mechanism and a nozzle knocker enable stable spray drying
Control Panel
Inlet temperature, outlet temperature, and drying air amount are digitally displayed. Setting is made on the touch panel that allows operation settings, operation status display as well as error display, and settings of various operation conditions.
Specifications
Specifications
| Item Code | 212777 |
|---|---|
| Model | GB210-A |
| Temp. adjusting unit setting range | 40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature) |
| Temperature adjusting accuracy | Inlet temperature±1°C |
| Spraying system | Two-way nozzle, Nozzle No. 1A as standard |
| Drying air amount adjusting range | 0 to 0.7m3/min |
| Spray air pressure adjusting range | 0 to 0.3MPa |
| Liquid sending pump flow rate range | 0 to 26mL/min |
| Spray air pressure adjusting range | 0 to 0.3MPa |
| Liquid sending pump flow rate range | 0 to 26 mL/min |
| External output | Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA) |
| Automatic lift | Moving up/down of glass chamber automatic lift |
| Temperature adjusting device | PID digital temperature adjusting device |
| Touch panel | Blower, Heater, Liquid sending pump, Pulse jet switch, Error display |
| Control select switch | Inlet temperature, Output temperature control switch (Outlet temp. control is conditional) |
| Temperature sensor | 2.0kW (at200V) to 2.88kW (at240V) |
| Heater | 2.0 kW (at 200V) to 2.88 kW (at 240V) |
| Liquid sending pump | Fixed amount peristaltic pump |
| Spraying air pump | Spraying air compressor (Sold separately) is used. |
| Service outlet | For stirrer: AC100V, Max. 2A |
| Suction blower | Bypass blower, Brushless DC motor |
| Filter | Suction filter, Exhaust filter |
| Recovery of solvent | Solvent recovery unit GAS410 (sold separately) is used. |
| Spray nozzle cooling mechanism | Connector: Nipple×2, O.D.:ø10.5 mm |
| Spray air connection diameter | Nipple diameter:ø7 mm |
| Exhaust connecting diameter | ø50mm |
| Accessories | Silicon tube (with a stopper)×3, Tiron tube (with a stopper)×2 Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, Teflon braided hose 5m (with two hose bands), Container table |
| Spray air line washing function | Spraying at the nozzle tip, Manual pulse jet system |
| Safety function | Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error |
| External dimensions（W×D×H mm） | 760×420×1350mm |
| Power Source | AC220V 17A |
| Weight | 110kg |
Maintenance and warranty
Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
External dimensions do not include protrusions.