Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081

Fume Hood (Dry Scrubber Built-in) (LDF-N120S)

Previous 10 / 12 Next

Fume Hood (Dry Scrubber Built-in) (LDF-N120S) LDF Series Fume Hood, LD Series Fume Hood


Dry exhaust gas treatment system installed. It helps to remove organic solvents which difficult to remove, acids, alkali etc.
 
Features of Fume Hood (Dry Scrubber Built-in) (LDF-N120S)
  • Adsorption device installed on top of fume hood.
  • Activated carbon and chemical adsorbent (4 type) are selectable.
  • Time meter that shows the time of adsorbent is equipped.
Specifications
Item Code A002991
Model LDF-N120S
Exterior Cold-rolled steel plate (chemical resistance coating)
Interior Non-asbestos and non-combustible decorative board
Working surface (selection) Ceramic tight (S)
Glass door Tempered glass 6mm balance weight
Water faucet Single type 1pc
Socket AC115V/220V × 1pc
Fluorescent lamp 32W 1pc
Case material PVC
Adsorption Adsorbent amount (K type) 20 kg
Timer 0 ¡« 9,999.9h (for adsorbent specification time)
Differential pressure For pre-filter ( 0 ¡« 490Pa / 0 ¡« 50mmH2O) 1pc
Safety mechanism Exhaust delay timer, Door falling prevention stopper, Flow monitor
Option Gas tap, LED, safety mechanism
Exhaust air volume 12m3/min
Internal static pressure 216Pa (22mmH2O)
External dimensions£¨W×D×H mm£© 1200×750×2600mm
Power Source  
Weight 330kg
 
Maintenance and warranty
  1. Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
  2. External dimensions do not include protrusions.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version