28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
+6012-234 0081
- Constant Temperature & Drying Oven
- High Temperature Furnace
- Industrial Equipment
- Plasma Equipment
- Incubator
- Freeze Dryer & Cooling Trap
- Sterilizer
- Water Purifier
- Constant temperature bath
- Water Circulator
- Heater
- Rotary Evaporator
- Vacuum / Pressurize Pump
- Emulsifier, Stirrer, Shaker
- Granulating & Spray Drying
- Washer
- Fume Hood
- Clean Bench & Safety Cabinet
- Dry Ice Cleaning
- Extraction Machine
- Cleaning Equipment
- Dyeing Equipment
- Auxiliary Chemical
- OEM Services
- Mixer
Renetech Sdn Bhd
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
28-G & 28-1, Jalan Suria Puchong 4,
Pusat Perniagaan Suria Puchong,
47110 Puchong,
Selangor, Malaysia.
Supercritical Fluid Preparative scale CO2 extraction Equipment SE-600-10000 Series
| Previous | 4 / 4 | Next |
1.Specifications
1-1 Pressure=Max. 7250 Psi / 500 Bar
1-2 Temperature=Max. 100 ¡æ
2-1.Extraction Vessel= 1L X1set
2-1-1 Pressure=Max. 7250 Psi / 500 Bar
2-1-2 Temperature=Max. 100 ¡æ
2-1-3 Volume=600mlX1 (inner basket)
2-1-4 Material=Stainless steel.
2-1-5 Heating system=electric heating
2-2.Collection system=1 set
2-2-1 CO2 flow rate comtrol valve X 1set
2-2-2 Control valve heating module X 1set
2-2-3 Design for Collecting in atmospheric
2-3 Pressure control system= PM-10000C X 1set
2-4 Cooling system= 1 set
3.Material of tanks, piping and valves.
3-1 Piping:SUS 304
3-2 Structure: Aluminum
4.Control system and monitor
4-1 Control valve=manual type/ high pressure valve
4-2 Tenmperature control= Temperature cintrolor with thermal couple
4-3 Pressure control=Pressure gauge/Pressure Transducer
4-4 CO2 flow comtrol£ºflow meter / display the gas CO2 flow rate
5.Safety and Protection
5-1 Rupture dick= set pressure 8500 Psig)
5-2 Heating area with isolation jacket
6.Utility requirement (Supplied by buyer)
6-1 Power require= 220 V, 12 A
6-2 Compressed air: 7Kgf/cm2; 4 M3/min.
6-3 CO2 suppy=Liquid CO2 cyclinder with inner tub
7.Option( not standard )
7-1 Spare parts=(ex: seal/rupture dick,…….)
7-2 Co-Solvent pump module
------------------------------------------------------------------------------------------------------------------
Digital Pressure Control Module (PM-10000C)
Applied Fluid: Liquid carbon dioxide (LCO2)
Specifications
1. System output pressure: 1000~10000 psi
(depending on driving pressure)
2. System output flow rate: 200ml/min (up to 4350 psi)
3. Booster pump
4. Built-in pre-cooler (without chiller)
5. Piping: seamless stainless steel tube
6. Certification: Whole system pass CE,
EN 61010-2-010(2nd Ed) for use with EN 61010-1:2001 Standard
7. Dimensions: 360 mm × 600 mm × 270 mm
8. Weight: 30 kg
Control System
1. Color Touch-Panel for Pressure Control Systems and human-machine operation interface
2. Programmable pressure control system
3. Proportional precise pressure control
4. Multi-step for booster and immediately adjust / response control
5. Alarm (notice) for abnormal operation and operation timer
Safety Protection
1. Overpressure abnormal alarm devices
2. Emergency stop devices and automatic gas cut-off installations for overpressure
3. Safety relief valve for overpressure (full flow rate)
Utility Needs
1. Power supply: 110/220V
2. Source air: (5~8 kg/c©O)
3. Chilly: water temperature≤5¡æ